Saturday, 10 October 2026 | 6:53 | From Lindford
On Saturday, 10 October 2026 at 6:53, a Air Ambulance Helicopter departed from Lindford to University Hospital Southampton. It was the Air Ambulance Helicopter with registration number G-LNAC. The flight lasted 17 minutes. During that period, the aircraft travelled 30 miles at an average speed of 106 miles per hour at a maximum altitude of 1225 feet.
The helicopter G-LNAC is used as a air ambulance helicopter. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Helicopter.
Photo: James from Cheltenham, Gloucestershire
University Hospital Southampton, Southampton07:10
University Hospital Southampton, Southampton07:10
Shirley, Southampton07:09
Hollybrook, Southampton07:08
Aldermoor, Southampton07:08
University Hospital Southampton, Southampton07:07
Upper Shirley, Southampton07:07
Hollybrook, Southampton07:07
Glen Eyre, Southampton07:07
Chilworth, Hampshire07:06
Mansbridge, Hampshire07:06
Eastleigh, Hampshire07:06
Southampton Airport, Southampton07:05
Eastleigh, Hampshire07:04
Winchester, Hampshire07:04
Colden Common, Hampshire07:04
Lower Upham, Hampshire07:03
Roughay Farm Airfield, Southampton, Hampshire07:03
Upham, Hampshire07:03
Winchester, Hampshire07:00
Brockwood Bottom Farm Airstrip, Brockwood07:00
Winchester, Hampshire06:59
East Hampshire, Hampshire06:59
West Tisted Airfield06:59
East Hampshire, Hampshire06:58
East Tisted, Hampshire06:58
Colemore Farm Airfield, Faringdon, Oxfordshire06:58
East Hampshire, Hampshire06:57
East Tisted, Hampshire06:57
East Hampshire, Hampshire06:57
Newton Valence, Hampshire06:57
Selborne, Hampshire06:56
Blackmoor, Hampshire06:55
Selborne, Hampshire06:55
Blackmoor, Hampshire06:55
Bordon, Hampshire06:54
Mill Chase Road, Hampshire06:53
Air Ambulance Helicopter to Thruxton Aerodrome18 Mar 19:23
You can easily display helicopter flights on your own website. Use the embed code.
