Thursday, 30 July 2026 | 16:32 | From Cardiff Heliport
On Thursday, 30 July 2026 at 16:32, a Air Ambulance Helicopter departed from Cardiff Heliport to Clyro. It was the Air Ambulance Helicopter with registration number G-WENU. The flight lasted 23 minutes. During that period, the aircraft travelled 56 miles at an average speed of 148 miles per hour at a maximum altitude of 2925 feet.
The helicopter G-WENU is used as a air ambulance helicopter. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Helicopter.
Photo: James from Cheltenham, Gloucestershire
A438, Powys16:55
Clyro, Powys16:54
Clifford, Herefordshire16:54
Clyro, Powys16:53
Hay on Wye, Powys16:53
Llanigon, Powys16:52
Hay on Wye, Powys16:52
Llanigon, Powys16:50
The Vale of Grwyney, Powys16:47
Crickhowell, Powys16:46
Llangattock, Powys16:45
Crickhowell, Powys16:45
Clydach, Monmouthshire16:45
Darrenfelen, Monmouthshire16:45
Brynmawr, Blaenau Gwent16:44
Brynmawr, Monmouthshire16:44
Waunllapria, Monmouthshire16:44
Cwmcelyn, Blaenau Gwent16:43
Abertillery, Blaenau Gwent16:43
Cwmtillery, Blaenau Gwent16:42
Abertillery, Blaenau Gwent16:42
Pentwyn, Caerphilly16:41
Llanhilleth, Blaenau Gwent16:41
Pentwyn, Caerphilly16:41
Croespen-maen, Caerphilly16:40
Newbridge, Caerphilly16:40
West End, Caerphilly16:40
Abercarn, Caerphilly16:39
West End, Caerphilly16:39
Pont-y-waun, Caerphilly16:39
Wattsville, Caerphilly16:38
Machen, Caerphilly16:38
Rudry, Caerphilly16:37
Pontprennau, Cardiff16:36
Pentwyn, Cardiff16:36
Rhydypenau, Cardiff16:36
Llanedeyrn, Cardiff16:36
Penylan, Cardiff16:35
Adamsdown, Cardiff16:35
Pengam Green, Cardiff16:34
Cold Stores Road, Cardiff16:34
Cardiff, Cardiff16:33
Tremorfa, Cardiff16:33
Cardiff Heliport, Cardiff16:32
Air Ambulance Helicopter to Welshpool Airport29 May 16:38
Air Ambulance Helicopter to Clyro29 May 14:12
You can easily display helicopter flights on your own website. Use the embed code.
