Tuesday, 6 October 2026 | 9:05
On Tuesday, 6 October 2026 | 9:05 at 9:05, a Air Ambulance Aircraft departed from Glasgow Airport and is now flying over Inner Seas. This is the Air Ambulance Aircraft with registration number G-SASC. The flight has been in the air for 37 minutes. During that period, the aircraft travelled 131 miles at an average speed of 212 miles per hour at a maximum altitude of 16000 feet.
The aircraft G-SASC is used as an air ambulance aircraft. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Aircraft.
Photo: Mike Pennington
Inner Seas09:42
Inner Seas09:33
Bealach nan Each, Highland09:33
Highland, Highland09:33
Bourblaige, Highland09:33
Highland, Highland09:32
Inner Seas09:32
Highland, Highland09:32
Druimbuidhe, Highland09:31
Barr, Highland09:31
Highland, Highland09:30
Lochaline, Highland09:30
Larach Beag, Highland09:29
Lochaline, Highland09:29
Inner Seas09:26
Kilmore, Argyll and Bute09:25
Argyll and Bute, Argyll and Bute09:24
Drissaig, Argyll and Bute09:24
Loch Avich09:24
Dalavich, Argyll and Bute09:23
Ardchonnell, Argyll and Bute09:23
Argyll and Bute, Argyll and Bute09:22
Achnagoul, Argyll and Bute09:22
Killean, Argyll and Bute09:22
Inner Seas09:21
Mid Letter, Argyll and Bute09:21
Strachur, Argyll and Bute09:21
Balliemore, Argyll and Bute09:20
Argyll and Bute, Argyll and Bute09:20
Creag Mholach, Argyll and Bute09:19
Glenbranter, Argyll and Bute09:19
Loch Eck09:19
Strachur, Argyll and Bute09:19
Ardentinny, Argyll and Bute09:18
Inner Seas09:15
Greenock, Inverclyde09:15
Port Glasgow, Inverclyde09:14
Kilmacolm, Inverclyde09:13
Quarriers Village, Inverclyde09:13
Bridge of Weir, Renfrewshire09:13
Crosslee, Renfrewshire09:12
Johnstone, Renfrewshire09:12
Elderslie, Renfrewshire09:12
Linwood, Renfrewshire09:11
Glasgow Airport, Glasgow09:10
Glasgow Airport, Glasgow09:05
You can easily display helicopter flights on your own website. Use the embed code.
