Sunday, 19 July 2026 | 12:20 | From Rushcliffe
On Sunday, 19 July 2026 at 12:20, a Air Ambulance Helicopter departed from Rushcliffe to High Peak. It was the Air Ambulance Helicopter with registration number G-DRLA. The flight lasted 17 minutes. During that period, the aircraft travelled 45 miles at an average speed of 157 miles per hour at a maximum altitude of 1625 feet.
The helicopter G-DRLA is used as an ambulance helicopter. The helicopter is equipped with a stretcher for transporting patients. The helicopter is often used to transport to hospitals.
Photo: Alec Wilson
High Peak, Derbyshire12:37
Chelmorton CP, Derbyshire12:37
Monyash CP, Derbyshire12:35
Youlgreave, Derbyshire12:35
Middleton by Youlgrave, Derbyshire12:35
Youlgreave, Derbyshire12:35
Middleton by Youlgrave, Derbyshire12:34
Elton, Derbyshire12:34
Winster CP, Derbyshire12:33
Derbyshire Dales, Derbyshire12:33
Bonsall CP, Derbyshire12:32
Matlock, Derbyshire12:32
Middleton CP, Derbyshire12:32
Cromford CP, Derbyshire12:32
Wirksworth CP, Derbyshire12:31
Alderwasley CP, Derbyshire12:30
Ripley, Derbyshire12:29
Denby CP, Derbyshire12:28
Heanor, Derbyshire12:27
Shipley, Derbyshire12:27
Ilkeston, Derbyshire12:26
Cossall, Nottinghamshire12:26
Trowell, Nottinghamshire12:25
Stapleford, Nottinghamshire12:25
Bramcote, Nottinghamshire12:25
Beeston, Nottinghamshire12:24
City of Nottingham, Nottinghamshire12:24
Beeston, Nottinghamshire12:24
City of Nottingham, Nottinghamshire12:23
City of Nottingham, Nottingham12:23
Ruddington, Nottinghamshire12:22
Bradmore, Nottinghamshire12:22
Keyworth, Nottinghamshire12:21
Widmerpool, Nottinghamshire12:21
Stanton on the Wolds, Nottinghamshire12:21
Widmerpool, Nottinghamshire12:20
A46, Nottinghamshire12:20
Police Helicopter to Salsburgh20:37:24
Air Ambulance Helicopter to Widmerpool, Melton Road29 Sept 10:47
Air Ambulance Helicopter to Nottingham Heliport28 Sept 18:13
Air Ambulance Helicopter to Spalding26 Sept 16:33
Air Ambulance Helicopter to Sysonby, A60724 Sept 16:47
You can easily display helicopter flights on your own website. Use the embed code.
