Tuesday, 16 June 2026 | 14:53 | From Waltham Chase
On Tuesday, 16 June 2026 at 14:53, a Air Ambulance Helicopter departed from Waltham Chase to Redhill Aerodrome. It was the Air Ambulance Helicopter with registration number G-KSSC. The flight lasted 25 minutes. During that period, the aircraft travelled 55 miles at an average speed of 134 miles per hour at a maximum altitude of 1450 feet.
The helicopter G-KSSC is used as a air ambulance helicopter. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Helicopter.
Photo: Shona aakss
Redhill Aerodrome, Redhill, Surrey15:18
Redhill Aerodrome, Redhill, Surrey15:18
Redhill Aerodrome, Redhill, Surrey15:16
South Nutfield, Surrey15:15
Outwood, Surrey15:15
South Nutfield, Surrey15:15
Tandridge, Surrey15:15
Salfords, Surrey15:14
Reigate and Banstead, Surrey15:14
Norwood Hill, Surrey15:13
Mole Valley, Surrey15:12
Newdigate, Surrey15:12
Capel, Surrey15:11
Ockley, Surrey15:11
Okewood Hill, Surrey15:10
Walliswood, Surrey15:10
Ellens Green, Surrey15:10
Baynard's Park Airstrip, Horsham, West Sussex15:09
Cranleigh, Surrey15:09
Alfold Crossways, Surrey15:08
Alfold, Surrey15:08
Loxwood, West Sussex15:08
Waverley, Surrey15:08
Plaistow, West Sussex15:06
Northchapel, West Sussex15:06
Chichester, West Sussex15:05
Fernhurst, West Sussex15:04
Chichester, West Sussex15:04
Milland, West Sussex15:03
Rogate, West Sussex15:03
Chichester, West Sussex15:02
Durleighmarsh Farm Airstrip, Petersfield, Hampshire15:02
Hill Brow, West Sussex15:02
Sheet, Hampshire15:02
Petersfield, Hampshire15:01
Buriton, Hampshire15:00
East Hampshire, Hampshire15:00
East Meon, Hampshire14:59
Winchester, Hampshire14:58
Soberton, Hampshire14:58
Droxford, Hampshire14:57
Swanmore, Hampshire14:57
Shirrell Heath, Hampshire14:56
Franklyn Close, Hampshire14:56
Waltham Chase, Hampshire14:53
You can easily display helicopter flights on your own website. Use the embed code.
