Saturday, 23 May 2026 | 17:00 | From Morriston Hospital Helipad
On Saturday, 23 May 2026 at 17:00, a Air Ambulance Helicopter departed from Morriston Hospital Helipad to Cardiff Heliport. It was the Air Ambulance Helicopter with registration number G-WROL. The flight lasted 20 minutes. During that period, the aircraft travelled 40 miles at an average speed of 118 miles per hour at a maximum altitude of 1600 feet.
The helicopter G-WROL is used as a air ambulance helicopter. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Helicopter.
Photo: James from Cheltenham, Gloucestershire
Cardiff Heliport, Cardiff17:20
Cardiff Heliport, Cardiff17:19
Cardiff Heliport, Cardiff17:18
Pengam Green, Cardiff17:17
Adamsdown, Cardiff17:17
Maindy, Cardiff17:16
Civic Centre, Cardiff17:16
Gabalfa, Cardiff17:16
Danescourt, Cardiff17:15
St Fagans, Cardiff17:15
Pentrebane, Cardiff17:15
St. Fagans, Cardiff17:14
Pentyrch, Cardiff17:14
Creigiau, Cardiff17:14
Groes-faen, Rhondda Cynon Taf17:13
Llantrisant, Rhondda Cynon Taf17:12
Llanharan, Rhondda Cynon Taf17:11
Brynna, Rhondda Cynon Taf17:11
Coychurch Higher, Bridgend17:11
Ogmore Valley, Bridgend17:10
Blackmill, Bridgend17:10
Ogmore Valley, Bridgend17:10
Lewistown, Bridgend17:10
Garw Valley, Bridgend17:09
Pont-y-rhyl, Bridgend17:09
Garw Valley, Bridgend17:09
Maesteg, Bridgend17:08
Garth, Bridgend17:08
Maesteg, Bridgend17:07
Bryn, Neath Port Talbot17:07
Cymer and Glyncorrwg, Neath Port Talbot17:07
Bryn, Neath Port Talbot17:06
Cwmavon, Neath Port Talbot17:06
Efail Fach, Neath Port Talbot17:06
Neath, Neath Port Talbot17:05
Neath Abbey, Neath Port Talbot17:04
Skewen, Neath Port Talbot17:04
Birchgrove, Swansea17:03
Glais, Swansea17:03
Ynystawe, Swansea17:02
Mynydd Gelli Wastad Road, Swansea17:02
Craig-cefn-parc, Swansea17:02
Morriston Hospital Helipad17:00
You can easily display helicopter flights on your own website. Use the embed code.
