Air Ambulance Aircraft to Inner Seas
Friday, 8 May 2026 | 12:09 | From Glasgow Airport
On Friday, 8 May 2026 at 12:09, a Air Ambulance Aircraft departed from Glasgow Airport to Inner Seas. It was the Air Ambulance Aircraft with registration number G-SASD. The flight lasted 43 minutes. During that period, the aircraft travelled 166 miles at an average speed of 231 miles per hour at a maximum altitude of 16000 feet.
Helicopter: G-SASD
The aircraft G-SASD is used as an air ambulance aircraft. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Aircraft.
Photo: Albert Bridge
166 miles
16000 feet
231 mph
44 minutes
12:09
12:52
Route
Inner Seas, 12:52
Inner Seas12:35
Calgary, Argyll and Bute12:34
Argyll and Bute, Argyll and Bute12:34
Achleck, Argyll and Bute12:34
Fanmore, Argyll and Bute12:34
Kilbrennan, Argyll and Bute12:33
Laggan Ulva, Argyll and Bute12:33
Oskamull, Argyll and Bute12:33
Geedandhu, Argyll and Bute12:33
Argyll and Bute, Argyll and Bute12:32
Pennyghael, Argyll and Bute12:31
Sròn Bhreac, Argyll and Bute12:31
Argyll and Bute, Argyll and Bute12:31
Inner Seas12:26
Ardfern, Argyll and Bute12:26
Kilmartin, Argyll and Bute12:26
Argyll and Bute, Argyll and Bute12:24
Inner Seas12:23
Argyll and Bute, Argyll and Bute12:23
Dunans, Argyll and Bute12:23
Argyll and Bute, Argyll and Bute12:22
Glenmassan, Argyll and Bute12:22
Argyll and Bute, Argyll and Bute12:21
Deer Park Cottages, Argyll and Bute12:21
Inner Seas12:18
Greenock, Inverclyde12:17
Port Glasgow, Inverclyde12:16
Kilmacolm, Inverclyde12:16
Quarriers Village, Inverclyde12:16
Bridge of Weir, Renfrewshire12:15
Houston, Renfrewshire12:15
Brookfield, Renfrewshire12:14
Johnstone, Renfrewshire12:14
Linwood, Renfrewshire12:14
Glasgow Airport, Glasgow12:13
Glasgow Airport, Glasgow12:09
Live flights
Today
Helicopter flights on your website?
You can easily display helicopter flights on your own website. Use the embed code.
