Wednesday, 8 April 2026 | 0:16 | From Bath
On Wednesday, 8 April 2026 at 0:16, a Air Ambulance Helicopter departed from Bath to Wiltshire Air Ambulance. It was the Air Ambulance Helicopter with registration number G-WLTS. The flight lasted 31 minutes. During that period, the aircraft travelled 38 miles at an average speed of 73 miles per hour at a maximum altitude of 1450 feet.
The helicopter G-WLTS is used as a air ambulance helicopter. The main purpose of this aircraft is to transport a Mobile Medical Team to an incident as quickly as possible, enabling the trauma doctor to provide immediate first aid on site. The aircraft is flying this flight as Air Ambulance Helicopter.
Photo: James
Wiltshire Air Ambulance00:47
Wiltshire Air Ambulance00:46
Commerce Way, Wiltshire00:46
Melksham, Wiltshire00:46
Semington, Wiltshire00:45
Melksham Without, Wiltshire00:44
Semington, Wiltshire00:43
Melksham, Wiltshire00:42
Seend Cleeve, Wiltshire00:42
Seend, Wiltshire00:41
Rowde, Wiltshire00:41
Devizes, Wiltshire00:40
Heddington, Wiltshire00:39
Devizes, Wiltshire00:37
Heddington, Wiltshire00:34
Devizes, Wiltshire00:33
Rowde, Wiltshire00:33
Devizes, Wiltshire00:31
Heddington, Wiltshire00:30
Devizes, Wiltshire00:28
Heddington, Wiltshire00:26
Devizes, Wiltshire00:25
Heddington, Wiltshire00:24
Bromham, Wiltshire00:24
Rowde, Wiltshire00:24
Bromham, Wiltshire00:23
Melksham Without, Wiltshire00:23
Melksham, Wiltshire00:22
Shaw, Wiltshire00:21
Whitley, Wiltshire00:21
Atworth, Wiltshire00:20
Lower Wraxall, Wiltshire00:20
South Wraxall private Airstrip, South Wraxall (Wiltshire)00:20
Monkton Farleigh, Wiltshire00:19
Bathford, Wiltshire00:19
Bathford, Bath and North East Somerset00:19
Bathampton, Bath and North East Somerset00:18
Trossachs Drive, Bath and North East Somerset00:18
Bath, Bath and North East Somerset00:16
Air Ambulance Helicopter to Bath31 Mar 17:49
Air Ambulance Helicopter to Bath, Brassmill Lane31 Mar 17:42
Air Ambulance Helicopter to Bath, Ferry Lane21 Mar 19:28
You can easily display helicopter flights on your own website. Use the embed code.
